Nonlinear Differential Equations Research Articles

Comparative analysis of thermal behaviour in functionally graded material fin under convective-radiative heat transfer: Homotopy perturbation method

In this study, the thermal characteristics of a fully wet, moving longitudinal fin made from linear Functionally Graded Material (FGM) is explored. The fin response to convective-radiative heat transfer is examined through three distinct FGM scenarios namely, a Homogeneous material (HM), Functionally Graded Material I (FGM I) having greater thermal grading near the base, and Functionally Graded Material II (FGM II) having increased thermal grading towards the tip. The derived energy equation is a second-order nonlinear ordinary differential equation is solved using the Homotopy Perturbation Method (HPM) compared with results found in the existing literature. The fin thermal profile has been graphically analysed for the thermal conductivity grading parameter (β), Peclet number (Pe) and other pertinent parameters. It is found that the temperature distribution along the fin is highest for the FGM II fin and lowest for the HM fin, with the FGM I fin displaying intermediate values. Efficiency of the fin (η) is discovered to be lowest in the case of HM fin structures followed by FGM I and FGM II fin structures at the base and vice versa at the tip. The results show significant potential of HPM which benefits the manufacture and design of FGM fin structures.

Analog quantum simulation of partial differential equations

Abstract Quantum simulators were originally proposed for simulating one partial differential equation in particular -- Schrodinger's equation. Can quantum simulators also efficiently simulate other partial differential equations? While most computational methods for partial differential equations -- both classical and quantum -- are digital (they must be discretised first), partial differential equations have continuous degrees of freedom. This suggests that an analog representation can be more natural. While digital quantum degrees of freedom are usually described by qubits, the analog or continuous quantum degrees of freedom can be captured by qumodes. Based on a method called Schrodingerisation, we show how to directly map D-dimensional linear partial differential equations onto a (D+1)-qumode quantum system where analog or continuous-variable Hamiltonian simulation on D+1 qumodes can be used. This very simple methodology does not require one to discretise partial differential equations first, and it is not only applicable to linear partial differential equations but also to some nonlinear partial differential equations and systems of nonlinear ordinary differential equations. We show some examples using this method, including the Liouville equation, heat equation, Fokker-Planck equation, Black-Scholes equations, wave equation and Maxwell's equations. We also devise new protocols for linear partial differential equations with random coefficients, important in uncertainty quantification, where it is clear how the analog or continuous-variable framework is most natural. This also raises the possibility that some partial differential equations may be simulated directly on analog quantum systems by using Hamiltonians natural for those quantum systems.

Weak signal detection method based on nonlinear differential equations

With the rapid development of computer network technology, it is often necessary to collect weak signals to collect favorable information. The development of signal detection technology is ongoing; however, various issues arise during the detection process. These issues include low efficiency and a high signal noise threshold. However, many problems will be encountered in the process of detection. In order to solve these problems, the nonlinear chaos theory is introduced to detect signals, and the simulation experiments of weak pulse signals and weak partial discharge signals are carried out respectively. The experimental results showed that the detection effect was remarkable in the quasi periodic state, and it had a good detection effect for weak pulse signals. At a signal-to-noise ratio of -25 dB, double coupling system, two-way ring coupling system, and single ring coupling system displayed detection success rates exceeding 98%. Meanwhile, the detection success rate of the strong coupling system was only 12%. Even at a noise signal ratio as low as -40 dB, the dual coupling system still maintained a detection success rate above 80%. The simulation results of partial discharge signal detection showed that there was a high fluctuation only at 2 ms, and the rest was basically stable at about 0 V, indicating that the system had a strong suppression effect on Gaussian white noise. When comparing the simulation results of the detection of the new chaotic system and the double coupling system, it was found that the new chaotic system has a superior impact in detecting weakly attenuated partial discharge signals. Through analysis of the system’s dynamic behavior, the research confirms its rich dynamic characteristics and sheds light on the reasons for phase state mutation and missed detection. The noise system is utilized for comparing the performance of various systems, with the goal of enhancing the system’s detection capability.

Tangent hyperbolic nanofluid flow through a vertical cone: Unraveling thermal conductivity and Darcy–Forchheimer effects

Purpose: This paper demonstrates the way tangent hyperbolic nanofluid flow through a vertical cone is influenced by varying viscosity and varying thermal conductivity. This study also seeks to illustrate the impact of convective boundary conditions on a fluid. The mathematical modeling also takes the Darcy–Forchheimer effect into account. Methodology: Using the appropriate similarity transformation, the fluid problem is reduced into a set of nonlinear ordinary differential equations. These systems of differential equations are evaluated numerically by applying the Optimal Homotopy Asymptotic Method. Findings: The nature of emergent parameters is examined in relation to the temperature distribution, nanoparticle concentration profile, and velocity profile. An increase in variable viscosity corresponds to a decrease in fluid velocity, while enhanced thermal conductivity results in elevated fluid temperature. The skin friction coefficient, Sherwood, and Nusselt numbers are numerically examined for active concerned parameters. These findings can be put into practice in a variety of fields such as polymer cooling systems and medication. Originality: Existing literature has yet to explore the combination of tangent hyperbolic nanofluids with varying viscosity and thermal conductivity under convective boundary conditions.

Error analysis for local discontinuous Galerkin semidiscretization of Richards’ equation

Abstract This paper concerns an error analysis of the space semidiscrete scheme for the Richards’ equation modeling flows in variably saturated porous media. This nonlinear parabolic partial differential equation can degenerate; namely, we consider the case where the time derivative term can vanish, i.e., the fast-diffusion type of degeneracy. We discretize the Richards’ equation by the local discontinuous Galerkin method, which provides high order accuracy and preserves stability. Due to the nonlinearity of the problem, special techniques for numerical analysis of the scheme are required. In particular, we combine two partial error bounds using continuous mathematical induction and derive a priori error estimates with respect to the spatial discretization parameter and the Hölder coefficient of the nonlinear temporal derivative. Finally, the theoretical results are supported by numerical experiments, including cases beyond the assumptions of the theoretical results.

Dynamics of propagation patterns: An analytical investigation into fractional systems

Recent years have seen a growing interest in fractional differential equations, particularly the fractional Chaffee-Infante ([Formula: see text]) equation, pivotal for understanding dynamics governed by fractional orders in specific physical systems. Exploring solitary wave solutions, this study employs the extended Khater method and truncated Mittag-Leffler function properties to formulate tailored solutions for the ([Formula: see text]) model. Through a traveling wave ansatz, the equation transforms into a nonlinear ordinary differential equation, revealing intricate propagation patterns of solitary waves. Visual representations aid comprehension, while rigorous validation ensures solution precision, ultimately providing a comprehensive understanding of system responses to external stimuli. This study effectively integrates analytical and numerical methodologies to derive precise solitary wave solutions, with significant implications for advancing comprehension of complex phenomena in various disciplines governed by fractional-order dynamics.

Impact of heat and mass transfer on the magnetohydrodynamic two-phase flow of couple stress fluids through a porous walled curved channel using Homotopy Analysis Method

The analysis of heat and mass transfer in the movement of immiscible couple stress fluids through a curved channel whose walls are at two different temperatures is the focus of the current work. Immiscible fluids are subjected to an external magnetic field that is taken normal to the fluid’s flow. For suction or injection in the flow, the channel walls are presumed to be porous. The buoyancy force, which is modelled using the Boussinesq approximation, and a constant pressure gradient cause the flow of the couple stress fluids in the curved channel. The highly non-linear coupled differential equations associated with the proposed work are solved with the use of the semi-analytic Homotopy Analysis Method. The semi-analytical expression of the various flow variables such as flow velocity, temperature, concentration, etc. is obtained by solving these non-linear differential equations after they have been non-dimensionalized by taking into account non-dimensional parameters. From the obtained results authors have noted how the two immiscible couple stress fluids’ flow velocity, temperature, and concentration behaviour depend on the flow-effecting parameters, including the couple stress parameter, curvature parameter, Schmidt number, and so on. Further, the authors of the proposed work have analysed the effect of various flow parameters on heat and mass transfer. Since the authors have studied the two-phase flow of couple stress fluids in a porous walled curved channel together with the effect of magnetic field, the current model has various applications in the fields of crude oil extraction, filtration, nuclear reactor, and bio-mechanics.

On the construction of various soliton solutions of two space-time fractional nonlinear models

Abstract In this article, we investigate a couple of nonlinear fractional models of eminent interests subsequently the conformable derivative sense is used to designate the fractional order derivatives. The given structures are transformed into nonlinear ordinary differential equations of integer order, and the extended simple equation technique is then employed to solve the resulting equations. Initially, the nonlinear space time fractional Klein–Gordon equation is considered emerging from quantum and classical relativistic mechanics, which have application in plasma physics, dispersive wave phenomena, quantum field theory, and optical fibres. Later, the (2 + 1)-dimensional time fractional Zoomeron equation is analysed which is convenient to explore the innovative phenomena related to boomerons and trappons. As a result, various new soliton solutions are successfully established. The reported results offer a key implementation for analysing the soliton solutions of nonlinear fractional models which are extremely encouraging arising in the recent era of science and engineering. The 3D simulations have been carried out to demonstrate dynamics of the various soliton solutions for a given set of parameters.

Stabilization and destabilisation of non-autonomous stochastic nonlinear delay differential equations

Stabilization and destabilisation of non-autonomous stochastic nonlinear delay differential equations

Numerical approximation of the typhoid disease model via Genocchi wavelet collocation method

AbstractIn this paper, we have considered the fractional typhoid disease model and obtained the numerical approximation of the model via the innovative wavelet scheme called the Genocchi wavelet collocation method (GWCM) with the help of Caputo fractional derivative for the fractional order. The approach under consideration is a powerful tool for obtaining numerical solutions to fractional-order nonlinear differential equations. The GWCM approach yields accurate solutions that are very close to exact solutions for highly nonlinear problems by avoiding data rounding and just computing a few terms. The Genocchi wavelet basis functions possess remarkable properties, including compact support, making them well-suited for approximating solutions to differential equations. The main benefit of this method lies in its capability to reduce the computational complexity associated with solving systems of ODEs, resulting in accurate and efficient solutions. The results of the developed technique, the RK4 method, and the ND solver have been compared. The numerical outcomes demonstrate that the implemented technique is incredibly effective and precise for solving the Typhoid model of fractional order. This paper contributes to numerical analysis by introducing the Genocchi wavelet method as a robust tool for solving biological models.

Approximate closed‐form solution of free convection flow past a vertical cone

AbstractThis paper presents a technique to find the closed‐form solution of the boundary‐value problem representing free convection flow past a vertical cone. Partial differential equations that govern the flow are converted into nonlinear ordinary differential equations with the aid of similarity transformations. First, a numerical solution is obtained with the help of the bvp4c package of MATLAB, and then utilizing the numerical solution, the closed‐form solution is obtained. The accuracy of the closed‐form solution is analyzed by the residual technique. Graphs of the residuals of the governing equations indicate that our approximate closed‐form solution closely matches the exact solution.

On the solutions of space-time fractional CBS and CBS-BK equations describing the dynamics of Riemann wave interaction

In this paper, Kudryashov and modified Kudryashov methods are implemented for the first time to compute new exact traveling wave solutions of the space-time fractional [Formula: see text]-dimensional Calogero–Bogoyavlenskii–Schiff (CBS) equation and Calogero–Bogoyavlenskii–Schiff and Bogoyavlensky Konopelchenko (CBS-BK) equation. With the help of wave transformation, the aforementioned fractional differential equations are converted into nonlinear ordinary differential equations. The purpose of this paper is to devise novel exact solutions for the space-time-fractional [Formula: see text]-dimensional CBS and the space-time-fractional CBS-BK equations by utilizing the Kudryashov and modified Kudryashov techniques. The solutions, thus, acquired are demonstrated in figures by choosing appropriate values for the parameters. The solutions derived take the form of various wave patterns, including the kink type, the anti-kink type and the singular kink wave solutions. The obtained solutions are indeed beneficial to analyze the dynamic behavior of fractional CBS and CBS-BK equations in describing the interesting physical phenomena and mechanisms. The obtained solutions are entirely new and can be considered as a generalization of the existing results in the ordinary derivative case. The techniques presented here are very simple, efficacious and plausible and hence can be employed to attain new exact solutions for fractional PDEs.

Stochastic evolution equations with Wick-analytic nonlinearities

We study nonlinear stochastic partial differential equations with Wick-analytic type nonlinearities set in the framework of white noise analysis. These equations include the stochastic Fisher–KPP equations, stochastic Allen–Cahn, stochastic Newell–Whitehead–Segel, and stochastic Fujita–Gelfand equations. By implementing the theory of C 0 − semigroups and evolution systems into the chaos expansion theory in infinite dimensional spaces, we prove the existence and uniqueness of solutions for this class of stochastic partial differential equations.

Simulation of hybrid boiling nano fluid flow with convective boundary conditions through a porous stretching sheet through Levenberg Marquardt artificial neural networks approach

In the domain of artificial neural networks, the Levenberg-Marquardt technique stands out for its innovative approach and convergent stability. It generates a numerical approach for the progression of a hybrid Cu–Al2CO3/water nanofluid on a porous stretched sheet (HNF-PSS), employing regression plots, state transition measures, histogram representations, and mean squared errors. This work explores the analysis of the fluid flow problem associated with HNF-PSS, introducing a novel application of an intelligent computing system that utilizes the effectiveness of neural networks trained by the Levenberg-Marquardt algorithm (NN-TLMA). The initial mathematical expression, expressed in terms of partial differential equations (PDEs) for HNF-PSS, undergoes transformation into dimensionless nonlinear ordinary differential equations (ODEs). The collection of data for the envisioned NN-TLMA involves parameters influencing the velocity of the HNF-PSS system model, generated using the Lobatto IIIa formula. The efficacy of the suggested NN-TLMA for solving the HNF-PSS is robustly verified by examinations of state transition dynamics, regression analyses, mean square error, and error histogram studies. The consistent alignment of the obtained results with corresponding solutions attests to the legitimacy of the structure, achieving a high level of accuracy within the range of 10–6 to 10–8. Insightful findings demonstrate that the thermal Biot number contributes significantly to an upsurge in fluid temperature. Furthermore, an augmentation in nanofluid concentration and thermal profile is found to increase the porosity strength of the medium. Nevertheless, an attenuation in the velocity profile is noted under these conditions. The application of this simulation work can be found in optimizing the designs of heat exchanger, in biomedical application and in renewable energy processes.

New oscillation results for first-order nonlinear difference equations with retarded arguments

New oscillation results for first-order nonlinear difference equations with retarded arguments

Automated intelligent design of modified uni-traveling carrier photodectors

This paper introduces an automatic intelligent design method for the modified uni-traveling carrier photodetector (MUTC-PD). The conventional photodetector design process often relies on the numerical solution of complex nonlinear partial differential equations to simulate and optimize device performance, which is not only computationally intensive but also inefficient. To overcome this challenge, we apply the charge control principle to calculate the photodetector bandwidth, which improves the computational speed by a factor of approximately 1800 compared to the numerical solution of nonlinear partial differential equations. To further optimize the structure of the photodetector, we incorporate the Velocity Varying Climbing Particle Swarm Optimization (VVCPSO) algorithm. This is an improved algorithm based on the traditional particle swarm algorithm, which is able to quickly find the optimal solution in a complex parameter space. By applying the VVCPSO algorithm, we successfully fine-tuned the photodetector structure and obtained structural parameters with optimal performance. Our thorough verification process confirms that the proposed method is consistent with the results of ATLAS simulation software. Automated design has resulted in a high-performance MUTC-PD with a responsivity of 0.52A/W and a bandwidth of 60 GHz (@-3 V) at a mesa diameter of 16µm. Compared to the pre-optimized device, the bandwidth is increased to three times the original. By reducing the mesa diameter to 4µm, the bandwidth can be further increased to 82 GHz (@-3 V). The proposed method's calculation speed is fast enough, enabling extensive parameter studies to optimize device performance.

Analytical solution to boundary layer flow and convective heat transfer for low Prandtl number fluids under the magnetic field effect over a flat plate

AbstractThe present study aims to quantify the flow field, flow velocity, and heat transfer features over a horizontal flat plate under the influence of an applied magnetic field, with a particular emphasis on low Prandtl number fluids. Nonlinear partial differential expressions can be incorporated into the ordinary differential framework with the use of appropriate transformations. This research utilizes the variational iteration method (VIM) to approximate solutions for the system of nonlinear differential equations that define the problem. The objective is to demonstrate superior flexibility and broader application of the VIM in addressing heat transfer issues, compared to alternative approaches. The results obtained from the VIM are compared with numerical solutions, revealing a significant level of accuracy in the approximation. The numerical findings strongly suggest that the VIM is effective in providing precise numerical solutions for nonlinear differential equations. The analysis includes an examination of the flow field, velocity, and temperature distribution across various parameters. The study found that improving temperature patterns, velocity distribution, and flow dynamics were all positively impacted by increasing the Prandtl numbers. As a result, this leads to the thickness of the boundary layer to decrease and improves heat transfer at the moving surface. Thus, the convection process becomes more efficient. When the strength of the magnetic field is increased, the velocity of the fluid decreases. This observation aligns with expectations since the magnetic field hampers the natural flow of convection. Notably, the convection process can be precisely controlled by carefully applying magnetic force.

Exponential-form predefined-time convergent controller and its applications to Van-der-Pol system and 2-DOF helicopter

This paper proposes a predefined-time convergent stabilization controller for a class of nonlinear systems. First, a controller is introduced for linear systems where the convergent time is selected in advance, independent of initial conditions, and can be assigned as a parameter of a control input. The corresponding result is then obtained for a multidimensional system consisting of [Formula: see text] nonlinear differential equations. The block control technique is employed to consequently stabilize each state component by a virtual control until the real control appears. Finally, the presented result is applied to a multivariable nonlinear system to design a predefined-time convergent robust controller. To show effectiveness of the proposed convergent controller, numerical simulations have been carried out for a Van-der-Pol system and a 2-degree-of-freedom (2-DOF) helicopter model.

Mathematical Model for a Lithium-Ion Battery with a SiO/Graphite Blended Electrode Based on a Reduced Order Model Derived Using Perturbation Theory

Abstract Silicon oxide (SiO) is a promising anode material for high-energy lithium-ion batteries, as it is made from low-cost precursors, has a potential close to that of Li, and has high theoretical specific capacity. However, the applications of SiO are limited by the intrinsic low electrical conductivity, large volume change, and low coulombic efficiency, which often lead to poor cycling performance. A common strategy to address these shortcomings is to blend SiO with graphite active materials to form a composite anode for better capacity retention. In this work, we derive a reduced order model (ROM1) using perturbation theory. We employ the multi-site, multi-reaction (MSMR) framework of a composite porous electrode blend consisting of two lithium-host materials, SiO and graphite. The ROM1 model employs a single-particle model (SPM) approach as the leading-order solution and involves the numerical analysis of a single, nonlinear partial differential equation for each host material that describes diffusion by means of irreversible thermodynamics, wherein chemical-potential gradients are the driving forces for the diffusion. The first-order correction treats losses other than that of the SPM.

Analyzing the time-fractional (3 + 1)-dimensional nonlinear Schrödinger equation: a new Kudryashov approach and optical solutions

The paper focuses on investigating the time-fractional (3 + 1)-dimensional cubic and quantic nonlinear Schrödinger equation. We adopt the novel Kudryashov method to generate a distinct class of optical solutions for the current conformable fractional derivative problem. Our method explores various solution forms, including dark, wave, mixed dark-bright, and singular solutions. The soliton solutions we construct are visually represented to illustrate the influence of the fractional order derivative. Further, we elucidate the influence of solution parameters on the wave envelope, providing clear interpretations through 2D graphics presentations. The results underscore the efficacy of our approach in discovering exact solutions for nonlinear partial differential equations, especially in cases where alternative methods prove ineffective. The significance of the present paper lies in its contribution to advancing the understanding of the behavior of optical solutions in nonlinear systems, providing valuable insights for both theoretical and practical applications. In the field of nonlinear optics, this equation can describe the propagation of optical pulses in nonlinear media. It helps in understanding the behavior of intense laser beams as they propagate through materials exhibiting nonlinear optical effects such as self-focusing, self-phase modulation, and optical solitons.